2.Operating steps
2.1 Paving the disposable pad on the cart, placing the prepared materials
neatly and vacating a small area as the dispensing area. This area should be
kept clean, can not be placed indiscriminately, and cannot be easily crossed.
Brine is filled into 6 pieces of disposable gauze;
2.2 Clean the face
2.3 Put on the inspection gloves and thoroughly use the alcohol gauze to
thoroughly clean the instrument and the base of the main unit. Disinfect it once,
and disinfect the handle with a small cotton swab dipped in alcohol.
2.4 Dispose the disposable nanochip and install the original liquid bottle to the
operation. Inside the handle card slot;
2.5 Start the machine, enter the operation interface, select the demonstration
mode or use the I C card to enter the card;
2.6 Put the salt water into the solution bottle and put it on the handle.
2.7 installing the nanochip and click the button of tube cleaning to clean it.
2.8 After finishing the cleaning, click the button and return to the main
operation interface ;
2.9 Put the product into the solution bottle and put it on the handle .
2.10 Clicking EMS , select the skin sensitivity , propose from 2 to adjust.
2.11 Click RF then adjust energy from 2.
2.12 speed is recommended to adjust 5 (the faster the speed , the more
obvious the tingling ) , the dosage is recommended to adjust 8 or 9.
2.13 Put on the surgical hand cover and wipe the face with the raw salt water
gauze block twice.
