26
CHRONOGRAPH 2 EYE
Setting the time
1. Pull crown out to position 3 (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back to position 1.
Setting the date
1. Pull crown out to position 2 (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position 3 (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back to position 1.
Chronograph
• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.
Please note:
Before using the chronograph functions, please ensure that:
- the crown is in position 1 (= normal position).
- the two chronograph hands are precisely at zero position following
activation of pusher B. Should this not be the case, the positions of
the hands must be adjusted (see the chapter entitled “Adjusting the
chronograph hands to zero position”).
A
B
1 2 3
CENTER STOP-SECOND
MINUTE COUNTER
SECOND HAND
5021.D
