33
Chronograph Functions
Before using the chronograph, please ensure that:
• The crown is in position 1.
• The two chronograph hands are precisely at zero (12:00) position
after pressing B. Should this not be the case, the positions of
the hands must be adjusted. Please refer to the section titled
“Adjusting the Chronograph Hands to Zero Position.”
Basic Function
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Interval Timing
1. Press B while the chronograph is running to measure intervals
(timing continues in the background).
2. Press B again to display ongoing measured time.
3. Repeat steps 1 and 2 to measure additional intervals.
4. Press A to finalize timing.
5. Press B to reset to zero.
Adjusting the Chronograph Hands to Zero Position
If one or both chronograph hands are not in their correct zero (12:00)
positions after pressing B (for example, following a battery change):
1. Pull crown out to position 3.
2. Press A and B simultaneously for at least 2 seconds until center
stop-second hand rotates by 360°. Corrective mode is activated.
3. To adjust center stop-second hand, press A to move hand one
increment; press and hold A for fast advance.
4. Press B to advance to minute hand. Press A to move hand one
increment; press and hold A for fast advance.
5. Return crown to position 1.
