39 |
P a g e
39
the transfer of the call, the initiating base should be hang-up and the external call will now be connected to
the handset.
Transfer the call by handset
1)
When you’ve made or answered an external call, to transfer it to another handset or to the base, press the
INT
key. Key in the number of the handset or the base (the number of the base is “0”) you want to transfer
the call to.
2) If only one handset registered with a base, just press
INT
key. The external call will be put on hold.
3) When the other handset or base answers, press
key of the initiating handset to transfer the external
call to the other handset or base.
4) If the other handset or base does not answer, you can get back to the external call by pressing
INT
key
again or you will automatically be reconnected to the outside call after 30 seconds.
There-way conference call
To set up a three-way conference among the base, one handset and an external call (or two handsets and an
external call):
From Base
1)
When you’ve made or answered an external call by the base unit, press and hold
key and enter the
number of the handset you want to connect by using the keypad. The display will show the handset name
you have entered and the handset will ring. (If only one handset registered with a base, just press and
hold
key)
2) Once the desired handset answers the call, press * key on the base keypad, then the base and the
cordless handset will be connected to the external call.
3) When either the base or the handset hangs up, the other will still be connected to the external call.
From Handset
1) Either make or answer an external call with one handset (e.g. HS1)
2) Press
INT
key, then key in t
he number of another handset (or key “0” for the base), and the external call
will be put on hold. If only one handset registered with a base, just press
INT
key.
3) When the other handset (or the base) answers the call, press
key on the handset (HS1) to connect the
three parties together.
4) To end the conference call, either party hangs up or the other party will be left connected to the external
call.
5)
To Lock/Unlock the Keypad
To lock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
will appear on the top of display, “HS LOCKED” will appear on LCD.
While the keypad is locked, any key you press is invalid.
Summary of Contents for GD61ABB-UK
Page 6: ...6 P a g e 6 OVERVIEW ...
