EMPORIA GD61ABB-UK, Instruction Manual

Page: 18 / 40

18 | P a g e
18
OGM 2
“Sorry we cannot answer your call now, please call later”
To record your PERSONAL outgoing message (OGM)
When the LCD display
RECORD
, press
MENU
to hear a voice prompt “please record new announcement
after the beep
”. After a beep tone you can start speaking. When you want to end the recording, press
,
It is a good idea to write down your OGM as a script to help you record it correctly.
To delete the personal OGM and set back to the OGM default
When the LCD displays
DEFAULT
, press
MENU
to select it and the display will show
CONFIRM?
, press
the
MENU
to confirm, after a beep, the display will return to
DEFAULT
.

To set a NEW MESSAGE alert
You can set a new message alert tone which is normally turned off by default.
When the tone is turned on, you will hear this audible alert tone every 30 seconds when the phone is in idle
mode when you have a new message.
To select alert tone, in
TAM SETTINGS
, press
MENU
to enter, press
▼/OUT
key twice to show
TAM ALERT
,
press
MENU
to enter, and press
▲
/CID
or
▼/OUT
to choose
ON
or
OFF
, and press
MENU
to confirm. You will
hear a beep, then display will return to
TAM ALERT
.

To set the number of RINGS before ANSWER MACHINE starts
The telephone can answer calls from between 2 and 9 rings to allow you to ignore or answer the call. If you
don’t set a number, the ANSWER MACHINE (TAM) will answer after 5 rings.
If you want to dial in and collect you your messages REMOTELY
while you’re away, you can set the number of
rings to
TOLL SAVER
. If there are new messages, the telephone will answer the call after 2 rings, if there are
no new messages, it will answer after 5 rings. This allows you to end the call after 3 rings if there are no new
messages so that you can hang up and save on call charges.
Press
▼/OUT
key to select
SET RING
, press
MENU
to enter, press
▲
/CID
or
▼/OUT
to choose 2~9 or TOLL
SAVER rings. Press the
MENU
to confirm and return to previous menu.

To set ANSWER MACHINE TAM VOICE LANGUAGE
Press ▼/
OUT
key to select
TAM VOICE
, press
MENU/MUTE
to enter, press
▲/
CID
or
▼/
OUT
to select from
DEUTSCH
(German),
ENGLISH
(English),
FRANÇAIS
(French) and
ITALIANO
(Italian).

To change security code and prevent remote access for others (TAM PIN)
A security code is used to be able to remote access any message and is a 4-digit code. The default code is set
to
“0000”. Please change this PIN code as soon as possible as follows:
Press
▼/OUT
key to select
TAM PIN
, press
MENU
to enter and the display will show the current setting”0000”,
use the keypad to enter the new security PIN code, press
MENU
to confirm.