14 ENGLISH
USER MANUAL · Art.
Nr.:
BPM-V20-B · Model:
B22
›
FIRST USE OF THE BLOOD PRESSURE MONITOR
I. Activating the blood pressure monitor
Battery Installation
Use only 1.5V AAA alkaline batteries with this device.
1. You will find the battery compartment on the back of the blood pressure monitor.
To open, slide the cover down and remove it.
2. Install 4 × AAA size batteries so the
+
(positive) and
–
(negative) polarities match the
polarities of the battery compartment. Close the battery compartment with the cover
and make sure that the cover is securely in position.
Battery replacement
Low Battery Indicator
1. When the Low Battery Indicator appears on the display
, turn the blood pressure
monitor off and remove all the batteries. Replace the old batteries with 4 new ones.
Long-life alkaline batteries are recommended.
2. To prevent the damage of your blood pressure monitor from leaked battery fluid, please
take out the batteries if the monitor is unused for a longer period (generally more than
3 months). If battery fluid should get in your eyes, immediately rinse with plenty of clean
water and contact a doctor immediately.
3. Dispose the device, components and optional accessories according to applicable local
regulations. Unlawful disposal may cause environmental pollution.
4. Battery are dangerous goods, so do not mix it with other rubbish.
II. System Settings
After you load the batteries or connect an AC Adapter to the blood pressure monitor,
you can change the system setting by pressing and holding the
SET button
for more
than 3 seconds.
