Emplus WAP380, User Manual, Page: 30 / 48

29
*Default configuration: Default setting of channel selection is
“All” to perform auto channel on the exist channel list.
*None: Click “None” to disable the setting on this radio.
This radio is disabled.
*Group Configuration: Click specific groups of channels for
performing auto channel function. For example, users canclickU-NII-
1andU-NII-3toperformautochannelon these bands; the
mechanism of this AP will select the relatively optimal channel
to perform wireless service.
Data Rate: Select a data rate from the drop-down list. The data
rate affects throughput of data in the AP. Select the best balance
for you and your network but note that the lower the data rate,
the lower the throughput, though transmission distance is also
lowered.
RTS/CTS Threshold: Specifies the threshold package size for
RTC/CTS. A small number causes RTS/CTS packets to be sent more
often and consumes more bandwidth.
Client Limits: Limits the total number of clients on this radio.
Once setting the ceiling of client numbers, the maximum
Associated client devices will be restricted at this number.
Aggregation: Integrate multiple data packets into one packet
to deliver to client devices. This option reduces the number of
packets, but also increases packet sizes.
AP Detection: AP Detection can select the best channel to use by
scanning nearby areas for Access Points.
Distance: Specifies the distance between Access Points and client
devices. The proper setting for this parameter may assist Access
Points to avoid the improper operation when transmitting data
under afield application.
Save: Click Save to confirm the changes or Cancel to cancel and
return to previous settings.