background image

32039-1-0314

Page 22

EMPIRE

EMPIRE

Comfort Systems

Empire Comfort Systems Inc.

918 Freeburg Ave. Belleville, IL  62220

If you have a general question about our products, please e-mail us at 

[email protected]

If you have a service or repair question, please contact your dealer.

www.empirecomfort.com

Empire Comfort Systems Inc. warranties this space heating product to be free from defects at the time of purchase and for the periods 

specified below.  Space heating products must be installed by a qualified technician and must be maintained and operated safely, in

accordance with the instructions in the owner’s manual.  This warranty applies to the original purchaser only and is not transferable.  

All warranty repairs must be accomplished by a qualified gas appliance technician.

Limited Lifetime Parts Warranty with a Five-Year Limited Labor Warranty – Combustion Chamber and Heat Exchanger

 

If the combustion chamber or heat exchanger (see parts list) fails because of defective workmanship or material, Empire will  

 

repair or replace at Empire’s option.

 

Within five years from the date of purchase, Empire will pay reasonable labor to have the defective part repaired or replaced at 

 

Empire’s option.

Limited Five-Year Parts & Labor Warranty – All Other Components (Except Thermostats)

 

Should any part fail because of defective workmanship or material within five years from the date of purchase, Empire will

 

repair or replace at Empire’s option.

 

Within five years from the date of purchase, Empire will pay reasonable labor to have that defect repaired at Empire’s option.

Limited One-Year Parts Warranty – Remote Controls, Thermostats, Accessories, and Parts

 

Should any remote control, thermostat, accessory, or other part fail because of defective workmanship within one year from

 

the date of purchase, Empire will repair or replace at Empire’s option.

Duties of the Owner

 

The appliance must be installed by a qualified installer and operated in accordance with the instructions furnished with the

 appliance.

 

A bill of sale, cancelled check, or payment record should be kept to verify purchase date and establish warranty period.

 

Ready access to the appliance for service

What Is Not Covered

 

Damages that might result from the use, misuse, or improper installation of this appliance.

 

Travel, diagnostic costs and freight charges on warranted parts to and from the factory.

 

Claims that do not involve defective workmanship or materials.

 

Unauthorized service or parts replacements.

 

Removal and reinstallation cost.

 

Inoperable due to improper or lack of maintenance.

How To Get Service

 

To make a claim under this warranty, please have your receipt available and contact your installing dealer.  Provide the dealer

 

with the model number, serial number, type of gas, and purchase verification.  The installing dealer is responsible for providing   

 

service and will contact the factory to initiate any warranted parts replacements.  Empire will make replacement parts available  

 

at the factory.  Shipping expenses are not covered.

 

If, after contacting your Empire dealer, service received has not been satisfactory, contact: Consumer Relations Department,  

 

Empire Comfort Systems Inc., PO Box 529, Belleville, Illinois 62222, or send an e-mail to [email protected] with 

 

“Consumer Relations” in the subject line.

Your Rights Under State Law

 

This warranty gives your specific legal rights, and you may also have other rights, which vary from state to state. 

WARRANTY

Summary of Contents for GWT-50-3













































Reviews: