03
1
2
3
Then install the adapter on the back of your motherboard.
3
10
Intel mounting hole
8
C
9
B
D
A
A
D
C
B
AMD mounting hole
4
1
13
Depending on your Intel CPU, place the 4 corner screws (10) in
the corresponding hole of the CPU adapter (3), Be careful of
the direction!
Depending on your Intel processor, please use the correspond-
ing corner brackets (5). Then fix the corner brackets on the
pump using the screws (13)
Then remove the
protective film
Attention do not
forget this step as
this may damage
your installation!
Position the pump on your CPU previously coated with
thermal paste. Then fix the spring / pressure screws (9). Start
by adjusting the screws then tighten the screw A, the screw
C, then B and finally D.
1 2 3
INTEL
AMD1 2 3
AM4 1 2 3
UNIVERSEL 4
Install Liquid Force step by step
Apply the thermal paste (8) evenly to the CPU.
Apply the thermal paste (8) evenly to the CPU.