33740-17-0120
Page 59
Maintenance anD serVice (cont’D)
accessing Gas Valve and controls
1. Remove the Offset Frame and Glass Frame.
2. Remove the Burner Components Heat Shield.
see Figure 86
.
3. Remove logs from firebox.
4. Remove the liner bracket on top of the right-hand liner panel
and remove right hand liner panel.
5. Remove the Access Plate.
see Figure 86.
note
: The control Module is located in the front right hand corner
of the cavity. To remove it, lift up and away from the wall.
note
: If it is necessary to remove one of the gas valve train
components, break free the plumbing fittings and remove
the screw indicated in
Figure 87
.
COMPONENTS
HEAT
BURNER
SHIELD
ACCESS
PLATE
Figure 86
Figure 87