![background image](http://html1.mh-extra.com/html/empire-comfort-systems/vfd26fm-series/vfd26fm-series_owners-manual_2403987015.webp)
23466-4-0509
Page 15
LOG PLACEMENT
1. Place front logs (#1 and #2) between front grate flange and
main burner. Align notches on front logs with locator tabs in
base.
2. Place middle log (#3) between front and rear loop of burner.
Note: Do not place log on top of pilot assembly.
3. Place rear log (#4) on rear log shelf. Bottom flange of log must
be placed between the log shelf and burner tube.
4.
This step is optional for (A)VFD26Fp3L10 log sets.
Place
front twig (#5) onto (#1) log and flat area on (#3) log. The
bottom of the front twig is to be placed behind the grate tang
that is second from the left.
Attention:
Do not use Figures 12 and 13 to order logs. Refer to
Page 26, Parts list and Page 27, Parts View to order logs.
Refer to Figure 12 for the following warning.
Warning:
Failure to position the parts in accordance with
this diagram or failure to use only parts specifically approved
with this heater may result in property damage or personal
injury.
Figure 12
1
4
5
3
2
Figure 13