![background image](http://html1.mh-extra.com/html/empire-comfort-systems/p-6/p-6_installation-instructions-and-owners-manual_2403973007.webp)
31447-5-0214
Page 7
Remote Control
Options &
Accessories
Description
FRBC
Millivolt/IP Battery Remote ON/OFF
FRBTC
Millivolt/IP Battery Remote T-Stat
TMW
Millivolt/IP Wireless Wall Thermostat
TRW
Millivolt/IP Reed Switch Wall Thermostat
FWS-1
Direct Ignition/Millivolt/IP Wall Switch
FREC
Electric Remote
Venting
Options
Description
DVVK-4TSP
(DVVK-4TS)
Top Vent Kit (Horizontal) - 4½" to 6" wall thickness
DVVK-4TP
(DVVK-4T)
Top Vent Kit (Horizontal) - 8" to 12" wall thickness
DVVK-4RP
(DVVK-4R)
Rear Vent Kit (Horizontal) - 5" to 7" wall thickness
DVVK-4VP
(DVVK-4V)
Vertical Vent Kit
DVVK-4F
Horizontal Flex Vent Kit (4' Flex)
DVVK-4RE
Horizontal Round Termination wall thickness
(up to 11 7/16")
DV822
Vinyl Siding Kit for DVVK-4RE
DVVK-4FV
Vertical Flex Vent Kit
DVEK-10
10' Vent Extension Kit
DVEK-25
25' Vent Extension Kit
Note: Rear vent installation can only be vented on natural gas.
NOTE: Air shutter settings are factory minimum settings. Some
venting configurations may require minor air shutter adjustments
for optimum performance.
SPECIFICATIONS
DVP36 Nat Models
Input Btu/hr Maximum
25,000
Btu/hr Minimum (millivolt only) 18,000
KWH (Maximum)
7.3
(Minimum)
5.2
Orifice
#41 (P256)
Air Shutter Opening
1/8" (DVP36FP(3,7,9))
1/4" (DVP36FP5)
DVP36 LP Models
Input Btu/hr Maximum
27,000
Btu/hr Minimum (millivolt only) 21,000
KWH (Maximum)
7.9
(Minimum)
5.2
Orifice
1.55mm (P-258)
Air Shutter Opening
FULL OPEN
DVP36 Nat and LP Models
Height without standoff
34 3/4"
Width
39"
Depth
19 7/8"
Gas Inlet Shutoff Valve (pipe)
1/2" NPT
Summary of Contents for P)-6
Page 20: ...31447 5 0214 Page 20 Figure 29 Figure 30 Figure 31 EXAMPLES TOP VENT RUN...
Page 37: ...31447 5 0214 Page 37 Figure 57 DVVK 4FV DIRECT VENT TERMINATION KIT continued...
Page 46: ...31447 5 0214 Page 46 Figure 70 MILLIVOLT SYSTEM STANDING PILOT WIRING DIAGRAM...