![background image](http://html1.mh-extra.com/html/empire-comfort-systems/oni-24-1/oni-24-1_installation-instructions-and-owners-manual_2403957012.webp)
28096-11-1213
Page 12
ONI-(24,30) WIRING
Electronic Control Module Shield Installation.
1. Slip the split grommets over the wire harness.
2. Place the control shield into position over the control
module.
3. Feed wiring into slots on either side of the control
shield.
4. Snap the grommets into the holes on the shield to
retain and protect the wiring.
5. Complete wiring installation.
6. Secure shield to valve with two screws as shown.
MAIN
PILOT
Learn
MOTOR
COMM.
POWER
IPI
Continuous
Pilo
t
Off/O
n
Remote/Off
S
I
ADJ.
(GND)
HI/LO
Solenoid
ORANGE
(IGNITOR)
BLACK
(SENSOR)
BLACK
ORANGE
GREEN
WHITE
BROWN
PILOT
GAS CONTROL
VALVE
ELECTRONIC
CONTROL MODULE
N/A
AF-4000 B/P
RED
BLACK
BLACK
BROWN
RED
ORANGE
N/A