![background image](http://html1.mh-extra.com/html/empire-comfort-systems/millivolt-dvcd-fp3-4-series/millivolt-dvcd-fp3-4-series_installation-instructions-manual_2403942030.webp)
38712-4-0920
38712-4-0920
Page 30
Termination clearance for buildings with combustible and noncombustible exteriors.
Vertical Sidewall Installations
Important!
Minimum clearance between vent pipes and combustible materials is 3 inches on top, and 1 inch on bottom and sides.
Important!
When vent termination exits through foundation less than 20 inches below siding outcrop, the vent pipe must extend
outward so that the horizontal vent terminal is located flush to, or beyond the outcrop siding.
Information on Various Venting Routes and Components
Important:
It is always best to locate the fireplace in such a way that minimizes the number of offsets and horizontal vent length.
Since it is very important that the venting system maintain its balance between the combustion air intake and the flue gas exhaust,
certain limitations as to vent configurations apply and must be strictly adhered to.
The graph showing the relationship between vertical and horizontal side wall venting will help to determine the various vent lengths
allowable.
The horizontal vent run refers to the total length of vent pipe from the flue collar of the fireplace to the face of the outer wall.
The maximum horizontal vent run is 20 feet (6.10 m) when the vertical vent rise is 8 feet (2.44 m).
See Figure 32 on page 20.
Venting terminals shall not be recessed into wall or siding.
Figure 51
“l” = COMBUSTIBLE 12" (305mm)
= NONCOMBUSTIBLE 12" (305mm)
TERMINATION CLEARANCES