background image

LOG SET FOR USE WITH 

DIRECT VENT FIREPLACE

MODELS:

DVLL48BP92(N,P)-1

WARNING: If not installed, operated and maintained 

in accordance with the manufacturer's instructions, 

this product could expose you to substances in fuel 

or from fuel combustion which can cause death or 

serious illness.

INSTALLER:  Leave this manual with the appliance.

CONSUMER:  Retain this manual for future 

reference.

GAS-FIRED

INSTALLATION INSTRUCTIONS

AND

OWNER’S MANUAL

LS48THF-1

LOGS AND ROCKS SET

WARNINGS

If the information in this manual is not followed 

exactly, a fire or explosion may result causing 

property damage, personal injury or loss of life.

–  Do not store or use gasoline or other flammable

 

vapors and liquids in the vicinity of this or any 

other appliance.

–  Installation and service must be performed by 

a qualified installer, service agency or the gas 

supplier.

WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do not use 

any phone in your building.

•  Immediately call your gas supplier from 

neighbor’s phone. Follow the gas supplier’s 

instructions.

•  If you cannot reach your gas supplier, call the 

fire department.

This decorative media set includes an unusual 

assortment of logs and rocks in varying textures 

and colors to complement your linear fireplace - 

plus stainless steel coils to add a unique flair.

For ease of installation, unpack all pieces and lay 

out so that any identifying letters are visible.

Page 1

Summary of Contents for LS48THF-1

























Reviews: