36474-0-0316
Page 22
Rock and Log Placement is complete.
ROCK AND LOG PLACEMENT
TOP VIEW
FRONT VIEW
COMPLETING INSTALLATION
Crushed Glass Media
1. Place crushed glass media onto the burner cover, burner
screen and accent glass panels. See the Installation Instruc-
tions supplied with the fireplace for more information.
NOTICE:
Crushed glass should not be placed on the burner
screen area more than one layer deep. Excessive use of crushed
glass may create a greater chance of developing soot on logs.
Do not allow crushed glass to restrict the pilot flame. Do not
place crushed glass in the pilot bracket area.
Optional Stainless Steel Coils
Place the coils inside the fireplace. DO NOT place the coils in
a location where they will come into contact with flame. If coils
come in contact with flame, sooting may occur.
NOTICE:
Placement of coils near flame will cause the metal coil
to discolor with shades of blue or brown. However, does not ef-
fect the performance of the fireplace.
Final Steps
1. Re-install the glass door assembly. Test fire to ensure there
is minimal contact between the flame and the logs, rocks and
curls.
2. If the test fire is acceptable, re-install the barrier screen as
-
sembly.
3. If during the test firing there seems to be significant flame
impingement on the cross logs, there are two steps that can
be taken to reduce the impingement:
a. Pivot log left or right to move away from flame.
b. Thin out crushed glass directly under the cross log. This
can reduce the height of the flame directly under the log.
