background image

38616-0-0218

Page 4

REQUIREMENTS FOR CANADA

This unit 

cannot

 be installed in a UNVENTED application, 

this  unit

 can only 

be  installed  as  a  VENTED  application 

with these requirements.

IMPORTANT SAFETY INFORMATION

This unit complies with ANSI Z21.60and CGA 2.26 Decora

-

tive Gas Appliances For Installation In Solid Fuel Burning 

Fireplaces. Do not burn wood or solid fuels in a fireplace 

where a decorative gas log set is installed. This appliance is 

for installation only in a solid fuel burning fireplace, masonry 

fireplace or manufactured fireplace.

Warning: 

Any modification to this gas log set can be dan

-

gerous. Improper installation or use of the gas log set can 

cause serious injury or death from fire, burns, explosion or 

carbon monoxide poisoning.
1.  Please  follow  all  local  codes  regarding  installation, 

combustion  and  ventilation  air  or  in  the  absence  of 

local  codes  follow  the  National  Fuel  Gas  Code ANSI 

Z223.1(U.S.  installation),  or  CAN/CGA-B149,  Installa

-

tion Code (Canada installation).

2.  Proper installation, burner location and log placement 

is important to achieve optimum look and performance 

of your gas log set. The logs have been designed for 

easy location and placement on the grate and must be 

followed for proper operation.

3.  Do not operate the burner with glass doors in the closed 

position. A fireplace screen must be in place when the 

burner  is  burning.  Adequate  combustion  air  must  be 

provided for proper venting. All flames should go up and 

out the top of the firebox into the flue vent. If any flames 

float or curl forward into the room do not operate appli

-

ance. Check for an open flue and adequate combustion 

air into the room. A damper clamp 

must be installed on 

the firebox damper to maintain an open flue vent condi

-

tion.    Refer  to  fireplace  owners  manual  INSTALLING 

DAMPER CLAMP section.

4.  Young children must be carefully supervised when they 

are in the same room as an operating vent-free burner. 

Do not place stockings, clothing or any flammable ma

-

terial above or near the fireplace.

5.  Do not substitute or use materials other than those sup

-

plied for use with the log set.

6.  Also refer to IMPORTANT SAFETY INFORMATION in 

the fireplace Owner's Manual.

WARNING;  DO  NOT  OPERATE  THIS  GAS  LOG  SET 

WITH GLASS DOORS CLOSED

•  Clothing  or  other  flammable  material  should  not  be 

placed on or near the appliance.

•  Do not place debris or other articles on the log set dur

-

ing operation.

•  A window should be opened during the initial bake out 

period.

•  Installation  and  repair  should  be  done  by  a  qualified 

service  person.  The  appliance  should  be  inspected 

before use and at least annually by a qualified service 

person. More frequent cleaning may be required due to 

excessive lint from carpeting, bedding materials, etc. It 

is  imperative  that  control  compartments,  burners  and 

circulating  air  passageways  of  the  appliance  be  kept 

clean.

• 

Do not

 use this appliance if any part has been under 

water.  Immediately  call  a  qualified  service  technician 

to inspect the appliance and to replace any part of the 

control system and any gas control which has been un

-

der water. 

•  Never burn solid fuels in fireplace where a gas log set is 

installed.

•  This unit complies with ANSI Z21.60 Decorative Vented 

Appliances for Solid Fuel Burning Fireplaces. State or 

local codes may only allow operation of this appliance 

in  a  vented  configuration.  Check  your  state  or  local 

codes.

Summary of Contents for LS18CD-1





































Reviews: