34363-3-0220
Page 2
Empire Comfort Systems Inc. • Belleville, IL
INSTALLATION OF LINERS
1. Prebend the brackets included with the kit as shown in
Figure 3.
Figure 3
2.
For Ceramic Fiber Liners Only:
Place left and right rear
legs as shown in
Figure 4.
Figure 4
3.
Place rear panel on the back of the firebox and hold with one
hand.
See Figure 5.
Ensure rear panel is resting on fiber legs.
Note for Reflective Liners Only:
Place insulation behind
rear liner before installing.
Figure 5
4. Remove the screw plugging the bracket hole in the top of
the firebox.
5. Place left panel against left firebox and rear panel and hold
side in place. Secure panel in place with one of the brackets
and one #10 X 1/2 screw.
See Figure 6.
Figure 6
NOTE:
The side liners each have a small dimple to indicate the
bottom rear of the liner. When properly installed, the dimples will
be at the bottom rear of the fireplace.
6. Repeat steps 4 and 5 for the right side.
