![background image](http://html.mh-extra.com/html/empire-comfort-systems/dvl25fp32-series/dvl25fp32-series_installation-instructions-and-owners-manual_2404078008.webp)
30369-18-0619
Page 8
CLEARANCES
COMBUSTIBLE
FRAMING
ALLOWED
12" MIN.
CLEARANCE TO
COMBUSTIBLES
REQUIRED
NON-COMBUSTIBLE
FINISHING
MATERIALS ONLY
NON-COMBUSTIBLE
SUPPORT HEADER
RECOMMENDED
FRAMING BRACKETS
SECURE UNIT WITH
TWO SCREWS THROUGH
EACH FRAMING BRACKET
NOTE: IF STANDOFF SPACERS ARE
REMOVED, ALL COMBUSTIBLE
CLEARANCES MUST BE MAINTAINED
Combustible Material
No greeting cards, stockings or ornamentation of any type should
be placed on or attached to the fireplace. The flow of heat can
ignite combustibles.
The non-combustible support header recommended in
Figure 5
could be a metal stud that is tied in horizontally above the unit.
This optional header may take the place of the two top standoff
spacers. If the standoff spacers are not used, the combustible
above the fireplace must still remain at the minumum combustible
clearance opening heights as indicated by
Figure 2
, page 7.
Mantel Clearance
The minimum clearance to a combustible mantle is 25” from the
top of the fireplace top as illustrated in
Figure 4.
6 1/2"
MINIMUM CLEARANCE TO PERPENDICULAR
COMBUSTIBLE SIDE-WALL
(FROM EDGE OF DOOR FRAME)
3"
MIN
3"
MIN
3"
MIN
TOP VIEW
NON-COMBUSTIBLE AREA
TO SIDES AND BACK OF FIREPLACE
Figure 3
3" MIN. CLEARANCE
ABOVE VENT SYSTEM
1" MIN. CLEARANCE
FROM FRAMING TO
VENT SYSTEM
25" MIN.
DISTANCE FROM
TOP OF FIREPLACE
TO CEILING OR
COMBUSTIBLE MANTEL
12" MIN
NON-COMBUSTIBLE
3" MIN. CLEARANCE
TO COMBUSTIBLES
FROM BACK OF
FIREPLACE
TOP STANDOFF
SPACER
NON-COMBUSTIBLE
AREA (SHADED)
Figure 5
Figure 4
NOTE:
Framing brackets can be attached to sides of fireplace
in one of two positions. Screw the framing brackets to the front
set of pilot holes if securing brackets over finished wall materials.
Or, attach the framing brackets to the rearward set of pilot holes
when securing unit to framed opening.
See Figure 9.