![background image](http://html.mh-extra.com/html/empire-comfort-systems/dvct40csp95n-1/dvct40csp95n-1_installation-instructions-manual_2404074034.webp)
40651-2-0320
Page 34
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
The Thermostat Feature may be disabled if desired.
With all three AAA type batteries installed:
1. Take out one AAA battery.
2. While re-inserting the AAA battery, Push and hold down the
thermostat button. This will disable the thermostat feature on
the transmitter.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The ther
-
mostat can be set to a desired temperature to control the comfort
level in a room. To activate this function, press the Thermostat
Button.
See Figure 57
. The LCD display on the Transmitter will
change to show that the room thermostat is “ON” and the set
temperature is now displayed.
See Figure 68.
To adjust the
set temperature, press the Up or Down Arrow Buttons until the
desired set temperature is displayed on the LCD screen of the
Transmitter.
See Figure 69.
SET TEMPERATURE
ROOM TEMPER ATURE
Figure 68
Figure 69
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature gets
closer to the set point the Smart Function will modulate the flame
down. To activate this function, press the Thermostat Button until
the word “SMART” appears to the right of the temperature bulb
graphic.
See Figure 70
. To adjust the set temperature, press the
Up or Down Arrow Buttons until the desired set temperature is
displayed on the LCD screen of the Transmitter.
See Figure 71.
NOTE:
When Smart Thermostat is activated, manual flame
height adjustment is disabled.
Figure 70
Figure 71
Blower Control (Fan)
If the appliance is equipped with a hot air circulating fan, the
speed of the fan can be controlled by the Proflame system. The
fan speed can be adjusted through six speeds. To activate this
function, use the Mode Button
Figure 57
to index the fan control
icon.
See Figure 72
. Use the Up/Down Arrow Buttons
Figure
57
to turn on off or adjust the fan speed.
See Figure 73
. A single
“beep” will confirm reception of the command.
OFF
Figure 72
OFF
Figure 73