![background image](http://html.mh-extra.com/html/empire-comfort-systems/dvct40csp95n-1/dvct40csp95n-1_installation-instructions-manual_2404074033.webp)
40651-2-0320
Page 33
Turn On the Appliance
With the system OFF, press the ON/OFF Button on the Transmit
-
ter. The Transmitter display will show some other active Icons on
the screen. At the same time the Receiver will activate the appli
-
ance. A single “beep” from the Receiver will confirm reception of
the command.
Turn OFF the Appliance
With the system ON, press the ON/OFF Button on the Trans
-
mitter. The Transmitter LCD display will only show the room
temperature.
See Figure 63.
At the same time the Receiver will
turn off the appliance. A single “beep” from the Receiver confirms
reception of the command.
Remote Control Display - Figure 63
Remote Flame Control
The Proflame has six flame levels. With the system on, and the
flame level at the maximum in the appliance, pressing the Down
Arrow Button once will reduce the flame height by one step until
the flame is turned off.
The Up Arrow Button will increase the flame height each time it
is pressed. If the Up Arrow Button is pressed while the system is
on but the flame is off, the flame will come on in the high position.
See Figures 64 through 67
. A single “beep” will confirm recep
-
tion of the command.
OFF
Flame Off - Figure 64
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
OFF
Flame Level 1 - Figure 65
OFF
Flame Level 5 - Figure 66
OFF
Flame Level Maximum - Figure 67