Page 1
Direct vent
Gas Fireplace
Heater Fireplace
insert MoDels
Dvct(30,35)cBn95(n,p)-1
installer:
leave this manual with the appliance.
consUMer:
retain this manual for future reference.
This fireplace is design
certified in accordance
with American National
Standard/CSA Stan
-
dard ANSI Z21.88/CSA
2.33 and by Underwrit
-
ers Laboratories as a
Direct-Vent Gas Fire
-
place Heater and shall
be installed according
to these instructions.
GAS-FIRED
Ul File no. MH30033
HOT GLASS
DO NOT TOUCH
NEVER
WILL
CAUSE BURNS.
GLASS
UNTIL COOLED.
ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from the
hot viewing glass is provided with this appliance and shall
be installed for the protection of children and other at-risk
individuals.
DANGER
WarninG
Fire or eXplosion HaZarD
Failure to follow safety warnings exactly
could result in serious injury, death or
property damage.
— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
— WHat to Do iF YoU sMell Gas
• Do not try to light any appliance.
• Do not touch any electrical switch; do
not use any phone in your building.
• Leave the building immediately.
• Immediately call your gas supplier
from a neighbor’s phone. Follow the
gas supplier’s instructions.
• If you cannot reach your gas supplier,
call the fire department.
— Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
This appliance may be installed into a listed
wood-burning fireplace in an aftermarket,
permanently located, manufactured home
(USA only) or mobile home, where not
prohibited by state or local codes.
this appliance is only for use with the type
of gas indicated on the rating plate. this
appliance is not convertible for use with
other gases, unless a certified kit is used.
installation instrUctions
