![background image](http://html.mh-extra.com/html/empire-comfort-systems/boulevard-multifunction-remote-dvll60bp90/boulevard-multifunction-remote-dvll60bp90_installation-instructions-manual_2404038044.webp)
41117-0-0819
Page 44
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
Continuous Pilot/Intermittent Pilot (CPI/IPI) Selection
With the system in OFF position press the Mode Button
Figure
70
to index to the CPI mode icon.
See Figures 93 and 94.
Pressing the Up Arrow Button will activate the CPI. Pressing the
Down Arrow Button will return to IPI. A single beep will confirm
the reception of the command.
OFF
Figure 93
OFF
Figure 94
Button Lock
This function will lock the Buttons to avoid unsupervised
operation.
To activate this function, press the MODE and UP Buttons at the
same time.
See Figure 95.
To deactivate this function, press the MODE and UP Buttons at
the same time.
OFF
Figure 95
Low Battery Power Detection - Transmitter
The life span of the remote control batteries depends on various
factors: quality of the batteries used, the number of ignitions of
the fireplace, the number of changes to the room thermostat set
point, etc.
When the transmitter batteries are low, an Icon will appear on the
LCD display of the transmitter
See Figure 96
before all battery
power is lost. When the batteries are replaced this Icon will
disappear.
OFF
Figure 96