![background image](http://html.mh-extra.com/html/empire-comfort-systems/boulevard-multifunction-remote-dvll60bp90/boulevard-multifunction-remote-dvll60bp90_installation-instructions-manual_2404038024.webp)
41117-0-0819
Page 24
Begin the vent system installation by selecting the type of venting
to be installed and the path it will take. Verify clearances are met
throughout the path of the venting system.
NOTICE:
Some fireplaces cannot be vented out the rear of the
fireplace.
Determine how the vent system will be terminated out the
side of the house or through the roof. Verify clearances for the
termination.
When selecting a vent system for use with the fireplace, refer to
the “Special Vent Systems” section in this manual to determine
what systems are acceptable. Check all clearances and venting
components. Identify if any problems exist in the vent system.
Use
Figure 44
on page 27 for top venting to eliminate issues
after installation. Check pipe diameter on vent system and
fireplace to verify the size is the same.
NOTICE: All outer connection joints must be sealed with
aluminum tape, screws or silicone sealant rated above
300°F/149°C. The inner flue joints do not require any sealant.
VENT SYSTEM IDENTIFICATION
VENT SYSTEMS
The following vent systems are acceptable for use with the
DVLL60BP90 series fireplaces:
•
Simpson Duravent® GS 5in - 8in
•
American Metal Products 5in - 8in
•
Selkirk Direct-Temp® 5in - 8in
•
Security Secure Vent® 5in - 8in
•
Excel DV Venting 5in - 8in
•
Empire Flexvent Kit DVVK-5F
•
BDM - 5in - 8in
•
Metal Fab 5in - 8in
Figure 36
FLASHING
STORM
COLLAR
VERTICAL
TERMINATION
(THREE 90°
ELBOWS MAX)
WALL
THIMBLE
HORIZONTAL
TERMINATION
(THREE 90°
ELBOWS MAX)
90° ELBOW
OR
45° ELBOW
90° ELBOW
CEILING
FIRE STOP
WALL STRAP
PIPE LENGTH
THIMBLE
SPACER
SPECIAL DV VENT kITS
Available from Empire Comfort Systems, Inc. dealers.
DVVK-5RP
Direct-Vent Fireplace Vent Kit for Rear Vent,
6 to 12 inch wall thickness, Includes
58DVA-06, 58DVA-WT, and 58DVAHC
DVVK-5TP
Direct-Vent Fireplace Vent Kit for Top Vent,
Thru-the-wall, 4 to 6 inch wall thickness,
Includes 58DVA-E90, 58DVA-HC, 58DVA-06,
and 58DVA-WT
DVVK-5VP
Direct Vent Fireplace Vent Kit - Vertical,
Includes 58DVA-VCH, 58DVA-SC, and
58DVA-F6
DVVK-5TS
Top Vent Kit (Horizontal) - 4½in to 6in wall
thickness (114.3 mm to 152 mm)
DVVK-5F
Horizontal Flex Vent Kit (4' Flex) (1.22m)