39246-0-0718
Page 20
REMOTE OPERATION (CONT'D)
INITIAL SETUP - PROGAMMING MODE (CONT'D)
SETTING THE MINUTES
4. Press
(up) button to set
Minutes. 00-59.
NOTE:
Use right (up) button only.
Numbers scroll up (1, 2, 3...) to 59
then cycle back to 00.
• Press
(down) button to set
and scroll to the next menu item.
SETTING CHILD SAFETY LOCK
5. Set Child Safety Lock either ON or
OFF.
• Press
(up) button to set Child
Safety Lock ON (icon showing) or
OFF.
This concludes your basic programming. The remote will
automatically save your changes and go to operation
mode after 15 seconds of inactivity.
STANDARD HANDSET OPERATION
FLAME HEIGHT ADJUSTMENT
• To turn the main burner ON or to increase the flame
height, press the
(up) button.
• To decrease the flame height, press the
(down)
button or turn main burner OFF.
WARNING
Read through this entire warning before attempting
initial setup / programming.
A red number/icon indicates the icon is blinking. This
will help determine which menu item is being set or
programmed.
When programming a menu item, use the right (up)
button ONLY. Pressing the left (down) button will
cause the programming menu to skip to the next
menu item. If you accidentally skip to the next menu
item, you must cycle through all the menu items to
return to the item you were programming.
When adjusting a menu item, the number will scroll
up only (1, 2, 3...) and will cycle back to the beginning
number.
15 seconds of inactivity will cause the remote to
automatically go to operation mode. Follow Step 1.
INITIAL SETUP - PROGRAMMING MODE to return to
programming mode. Any changes will be saved each
time you exit programming mode.
INITIAL SETUP - PROGRAMMING MODE
• Press
(both buttons) and hold for 5 seconds
(until screen blinks) to enter Programming Mode.
• Press
(down) to scroll through menu items.
• Press
(up) to adjust menu items.
SETTING °F OR °C
1. Press
(up) button to choose
either °F or °C.
• Press
(down) button to set
and scroll to the next menu item.
SETTING 12 HOUR OR 24 HOUR MODE
2. Press
(up) button to choose
either “12” or “24”.
• Press
(down) button to set
and scroll to the next menu item.
SETTING THE HOUR
3. Press
(up) button to set the
Hour, 1-12 or 0-23.
NOTE:
Use the (up) button only.
Numbers scroll up (1, 2, 3,...) to 12
or 23 then cycle back to 1 or 0.
• Press
(down) button to set
and scroll to the next menu item.
PAGE 3
:
AM
