background image

Page 1

INSTALLATION INSTRUCTIONS

AND OWNER’S MANUAL

TRIPLE BURNER

(REQUIRES VENTED DECORATIVE  

LOG SET)

FOR INSTALLATION IN

SOLID-FUEL BURNING FIREPLACES

MODELS

AV(36,42)MTEKN-1

CONGRATULATIONS on the purchase of your 

new DOUBLE GAS BURNER! Your Decorative 

Gas Burner is designed and intended for instal-

lation in an approved, existing, fully vented, 

wood-burning fireplace, with a gas hook-up. 

General Information: These instructions 

are intended as a general guide and do not 

supersede national or local codes in any 

way. Authorities having jurisdiction should 

be consulted before installation. 

Installation and provision for combustion 

and ventilation air must conform to the 

Na-

tional Fuel Gas Code, ANSI Z223.1, or CAN/

CGA-B149.1, Natural Gas Installation Code, 

or CAN/CGA-B149.2, Propane Installation 

Code.

This appliance must be installed only in a solid-

fuel burning fireplace with a working flue and 

construction of noncombustible materials.

IMPORTANT! Read these instructions 

carefully before installing or operating this 

gas appliance. These instructions should 

be left with the homeowner for future 

reference.

Installer: Leave this manual with the appliance.

Consumer: Retain this manual for future reference.

 

WARNING

If the information in this manual is not 

followed exactly, a fire or explosion may 

result causing property damage, personal 

injury or loss of life.

—  Do not store or use gasoline or other 

flammable vapors and liquids in the 

vicinity of this or any other appliance.

—  WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do 

not use any phone in your building.

•  Immediately call your gas supplier 

from a neighbor’s phone. Follow the 

gas supplier’s instructions.

•  If you cannot reach your gas supplier, 

call the fire department.

—  Installation and service must be 

performed by a qualified installer, 

service agency or the gas supplier.

The vent damper must have a damper 

clamp attached to it to keep the damper from 

accidentally closing during operation.

This unit is NOT for use with solid fuel. Solid 

fuels shall NOT be burned in a fireplace where 

a decorative appliance is installed.

 

DANGER

If not installed, operated and maintained 

in accordance with the manufacturer’s 

instructions, this product could expose 

you to substances in fuel or from fuel 

combustion which can cause death or 

serious illness.

Summary of Contents for AV36MTEKN-1





















Reviews: