– 8 –
Congratulations!
on your purchase of this sophisticated EMPHASER ECP-XT3 2-way component system. If you
plan on installing the ECP-XT3 component system by yourself, please read the following in-
structions carefully, before attempting the installation. For any further information please contact
your EMPHASER dealer.
TECHNICAL DESIGN FEATURES
MID/WOOFER ECP-XT3
■
EURO-DIN ALUMINUM DIE-CAST BASKET
■
21 OZ. STRONTIUM-FERRITE MAGNET
■
WOVEN BLACK KEVLAR™ CONE
■
CAMBRIDGE MBR BUTYL RUBBER SURROUND
■
PROGRESSIVE BLACK NOMEX™ SPIDER
■
INVERTED ALUMINUM DUSTCAP
■
2-LAYER COPPER CLAD ALUMINUM WIRE VOICE COIL
■
31 OR 36MM Ø RED KAPTON™ VOICE COIL FORMER
■
VENTED CAVITY BELOW SPIDER
■
VENTED & EXTENDED CENTER POLE
■
SCREW TERMINAL BINDING POSTS
■
INSULATED TINSEL LEAD WIRES
TWEETER ECT30A
■
25 MM INVERTED DOME DLC TITANIUM TWEETER
■
TITANIUM DOME WITH DIAMOND LIKE CARBON COATING
■
ALUMINUM FORMER – CCAW WIRE VOICE COIL
■
NDFEB N40 NEODYMIUM MAGNET
■
TWEETER HOUSING PARTS MADE OF DIE-CAST ALUMINUM
■
FLAT- AND FLUSH MOUNTING ADAPTORS INCLUDED
■
LOW VISCOSITY FERROFLUID
CROSSOVER ECP-XT3
■
TWEETER ATTENUATION BY 4-POSITION JUMPER
■
GLASFIBER CIRCUIT BOARD WITH 70 UM TRACES
■
MKP POLYPROPYLENE METAL-FILM CAPACITOR
■
LOW TOLERANCE METAL-OXIDE RESISTORS
■
LOW RESISTANCE AIR CORE INDUCTORS
■
OSRAM HPCCR LAMP TWEETER PROTECTION
ECP25/26XT3 Manual 16.01.2003 20:22 Uhr Seite 8
