12
Figure 4 Output connection terminal
3.
Connect the prepared output terminal to the DA output port.
4.
Attach the
terminal
protection
cover
, and
tighten the screws as show in figure 5
Figure 5 Attaching the terminal protection cover
Completing Installation and Commissioning
Once the DA hardware and cables are installed, complete the following commissioning
procedures:
1.
Set the audio volume to a minimum level.
2.
Press the DA front panel power button. The POWER indicator light comes on to
show the DA is now turned on and working properly.
3.
Optimize the audio volume to an appropriate level. A sound plays through the DA
speaker to indicate the DA is working properly.
