10
Always follow these ignition and shut down instructions when lighting the rice cooker. A 5 minute
testing.
Notice to the Installer: the following must be performed to ensure proper operation.
1. Remove pot, wind shield, and base cover.
2. Turn gas valve to ON position.
3. Gently push on the THEN COOK button. It should stop half way down and not engage. This is a
safety feature that does not allow accidental start of the main burner unless the warming button
has already been pushed.
4. Push the left button marked FIRST IGNITE down until the unit clicks, then release it. This is the
ignition leaver and should light the pilot. The red button labeled WARMING controls the pilot
engages the WARMING button and exposes it. It will stay down until pushed up to extinguish
the pilot. If the pilot has not lit, repeat until the pilot lights.
5. If the pilot fails to remain lit, refer to Trouble Shooting on page 13.
6. Replace the pot, wind shield, and base cover in their proper order. With the pilot lit, push the
the click indicating that the sensor has reset. With the pilot lit, press the THEN COOK button
on page 13 for additional causes and remedies.
When igniting the pilot, position the jacket window directly over FIRST IGNITE and THEN COOK
buttons. Use caution when igniting pilot and maintain a safe distance from wind shield window.
When removing the pot, make sure to push the red WARMING button up until it clicks and is
period is required before lighting or relighting the pilot.
WARNING
SHUT DOWN
IGNITION AND SHUT DOWN TEST
RiceCookers_Manual.indd 10
1/3/22 8:11 AM
