49
Exhibit
A
Correct
Position
for
Dual
Burner
Here’s
the
procedure
to
check
the
condition
for
our
current
burner
design.
The
procedure
helps
the
electrode
to
sense
the
flame
correctly
1. Make
sure
the
Burner
Design
is
correct.
Our
current
design
for
the
burner
is
having
the
electrode
on
the
left
side
(10
o’clock)
and
cross-over
on
the
right
side
(2
o’clock).
There
are
four
parts
for
the
dual
burners.
They
are
burner
cap,
flame
ring
base,
flame
ring
and
burner
base.
2. Make sure the electrode is going through the hole on the flame ring and it is vertical to the
surface of flame ring base.
3. For the flame ring base part. make sure that the electrode will go through the hole on the 10
o’clock position. Make sure the electrode is not going through the hole next to the cross-over.
Summary of Contents for EMPV30GR03
