3.
Cooking
Settings
4.
Self clean mode
1) Select the required baking function, touch the button on the display screen, the interface will light
up the function options, and the default temperature and default time will appear on the display panel.
After touch self clean button Self Clean, Self Clean icon lights up
1. 2
：
00 working time 2:00
2. 3
：
00 working time 3:00
3. 3
：
30 working time 3:00
2) Click Start to Start the operation. When the actual temperature of the furnace core is lower than
170°F, the temperature digital tube only displays Lo. When the actual temperature of the furnace
core is higher than 170°F, the interface needs to display the current temperature in real time. When
the core temperature has reached the set value, the interface will always show that the set value no
longer changes in real time.
3) To set the temperature, you can modify the temperature by touching the corresponding digital
button. The number changes from right to left in turn. If it exceeds the allowed setting range, an invalid
sound "didi" will be emitted when touching the Start button.
4) Set the working time, touch cook time, the time digital tube display --:--, and blink, touch the
number key, the displayed numbers change from right to left, run the setting range (0:00-11:59), if
you do not set this parameter, the oven default 2 hours; If the value exceeds the allowed setting
range, the next operation is not allowed, and the system makes two invalid beeps. After the Cook
time is set, the system prompts you to enter Delay Start or touch start to start the operation.
5) To set the appointment function, touch Delay start to set the appointment. The default time is the
current clock time. Delay start indicates when the oven starts to work. After setting, touch the Start
button, and the screen will start the countdown of reservation. If the countdown time exceeds 1 hour,
the screen will display in the form of hour/minute. If the countdown time is less than 1 hour, the display
is displayed in the form of minutes per second.
Touch the Self Clean button in the control panel to enable the Self clean mode.
Self clean mode Touch self clean key
Touch delay time
Touch start
Ending
Other situation
When the self-cleaning is complete and the temperature
does not reach the unlock temperature, manually touch the
Start button at this time, and the buzzer prompt is invalid
End
The door lock motor began to turn
The door lock motor has touched
latch
1, indication that the door
has been locked, and the child lock icon on the screen lights up
Set start time (optional)
Repeatedly touch the self Clean key to select Clean Time
2:00 3:00 3:30 (Default)
Open the heating
10
