WARNING: The use of a gas cooking appliance results in the production of heat and moisture in
the room in which it is installed. Ensure that the kitchen is well ventilated especially when the
appliance is in use. Keep natural ventilation holes open or install a mechanical ventilation
device.
Prolonged intensive use of the appliance may call for additional ventilation, for example opening
of a window, or more effective ventilation, for example increasing the level of mechanical
ventilation where present.
WARNING: The base of the appliance should be protected from contact by a horizontal partition
or plate.
WARNING: Socket needs to be installed below the cooktop surface, and away from the fire source.
The appliance must be disconnect the electrical supply before servicing the appliance.
A manual valve be installed in an accessible location in the gas line external to the appliance for the
purpose of turning on or shutting off gas to the appliance.
Warning
：
Turn the knob counterclockwise to adjust the flame,
size, so that the flame
does not float out
of the container rim.
If need to adjust the flame size from big to small when operation, turn the knob counterclockwise 90
degrees to the
position. (See Figure 13)
Figure 13
When you need to change the gas cooktop, you must first close the air supply valve and the cooktop
valve, unplug the plug of models with AC power supply, only after that you can remove the connector
hose or threaded connector and then move the gas cooktop.
Warn of the potential hazards associated with storage cabinet areas above appliances.
Misoperation
can cause fire.
Save the orifices removed from the appliance for future use
.
10
