background image

The power cable for the XPA-1L should be unplugged from the outlet during severe electrical storms, or 

when unused for a long period of time.

Only replace the fuse(s) in the XPA-1L with fuse(s) of proper value and voltage rating. 
The XPA-1L should only be cleaned as directed in the Manual. Avoid spraying liquids directly onto the unit 

and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the 

inside of the unit.

You should seek service for your XPA-1L by qualified service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.

 

2. Objects or liquid have fallen or spilled into the vents.

 

3. The unit has been exposed to rain.

 

4. The unit exhibits a marked change in performance.

 

5. The unit has been dropped, or its enclosure or chassis is damaged.

WARNING: ThE XPA-1l Is A fUlly BAlANCED AmPlIfIER. ThE NEGATIVE sPEAkER TERmINAl 

Is ACTIVE, AND Is NoT AT GRoUND PoTENTIAl. Do NoT CoNNECT ThE NEGATIVE sPEAkER 

TERmINAl of AN XPA-1l AmPlIfIER (oR A sPEAkER TERmINAlTo WhICh IT Is CoNNECTED) 

To A CIRCUIT oR CommoN GRoUND AND Do NoT CoNNECT ThE NEGATIVE sPEAkER 

TERmINAls of TWo XPA-1l AmPlIfIERs ToGEThER. DoING so mAy REsUlT IN DAmAGE To 

ThE UNIT oR ThE sPEAkER oR CIRCUITRy To WhICh IT Is CoNNECTED.

NoTE: To ComPlETEly DIsCoNNECT ThE XPA-1l fRom ThE AC PoWER mAINs, DIsCoNNECT 

ThE AC PoWER CoRD fRom ThE AC RECEPTAClE.
NoTE: ThE PoWER CoRD oN ThE XPA-1l mUsT REmAIN READIly ACCEssIBlE AT All TImEs.

!

CAUTION

CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

!

Summary of Contents for XPA-1L



























Reviews: