background image

Page 17

UPA-200

EMOTIVA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 

DAMAGES ARISING FROM OR RELATED TO ANY DEFECTS IN OR DAMAGES TO 

ITS PRODUCTS.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION 

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR 

EXCLUSION MAY NOT APPLY TO YOU.

How do you get service?

   In order to make a claim under the warranty, you must:

1. 

Call a customer service representative (“CSR”) of Emotiva at 1-877-EMO-TECH  

 

 

(1-877-366-8324).  Provide the CSR with a description of your problem and the

 

 

serial number of the product for which the warranty claim is being made.  

2. 

The CSR will provide you with a returned material authorization number (“RMA”).  

3. 

Ship the product to Emotiva at the following address, with the RMA written in large,

 

 

bold numbers on the outside of the box, and with the letters “RMA” written before the

 

 

number.  Parcels arriving without an RMA number on the outside of the box will be

 

 refused. 

 

Emotiva Audio Corporation

 

 

Attn: Repair Department

 

 

135 Southeast Parkway Court

 

 

Franklin, TN 37064

How does state law apply?

  This warranty gives you specific legal rights, and you may 

also have other rights which vary from state to state.  

Summary of Contents for upa-200


























Reviews: