Emotiva MC-700, User Manual, Page: 17 / 37

Page 12
BasX MC-700 Surround Sound Processor
BasX MC-700 Remote Control
1
2
3
7
8
4
6
5
9
10
11
1. Power Button
This button is used to toggle the MC-700 between
Standby and On modes.
Note: The Remote Control will only operate when
the AC Power Switch on the rear panel of the MC-
700 is On.
2. Dim Button
This button controls the brightness of the front
panel VFD display, cycling through ten different
brightness levels.
3. Video Input Buttons
These buttons provide direct access to each of the
six Video Inputs on the MC-700.
4. Audio Input Buttons
These buttons are used to select the various Audio
Inputs on the MC-700. Each button selects and
then cycles through one set of inputs. The Analog
Button selects and then cycles through the Analog
Audio Inputs; the Digital Button selects and then
cycles through the Digital Audio inputs; the ARC
Button selects the Audio Return Channel audio
from your TV.
Note: If a Video Input is currently selected, and you then select an Audio Input, the video signal
from the previously selected Input will continue to play when the new audio source is selected.
5. Menu Button
The Menu Button activates the Setup Menu on the MC-700. When you’re in the Setup Menu,
pressing the Menu Button exits.
6. Volume Control and Navigation Buttons
In normal operation the Up Arrow and Down Arrow Buttons adjust the volume on the MC-700.
In the Setup Menu, the four Arrow Buttons and the Enter Button are used to navigate the menu.