Emotiva MC-700, User Manual, Page: 16 / 37

Page 11
BasX MC-700 Surround Sound Processor
10. IR Remote Input and IR Remote Output
Use the IR Remote Input to connect an external IR detector (eye); use the IR Remote Output to
connect an external IR signal transmitter (sometimes referred to as a flasher).
11. RS-232 Serial Remote Control Input
This input accepts control signals from an RS-232 Serial remote control device.
12. Trigger Output
A 12 VDC signal is sent from the Trigger Output of the MC-700 to turn on other devices when the
MC-700 is turned on. This signal can be used to turn on other trigger-enabled audio equipment -
such as a power amplifier.
13. Fuse Holder
To change the fuse in your MC-700, remove the power cable, then gently pry the fuse
compartment open. (The fuse holder opens like a drawer.) Replace the fuse with one of the
correct value, replace the fuse drawer, and reinsert the power cable.
Note: If the fuse in your MC-700 blows repeatedly without apparent reason, then you might
have an electrical fault, and you should call Emotiva Technical Support for assistance.
14. IEC Power Cable Receptacle
The IEC Power Cable receptacle accepts any standard IEC power cable. A high quality commercial
power cable is provided with your MC-700.