Airmotiv 3
B
Page 7
Operating Your Airmotiv 3B’s
VOLUME
INPUT
BT LINE IN
BT PAIRING STANDBY
Your Airmotiv 3B Precision Powered
Bluetooth Monitors are operated using
the control panel located on the top of
the right speaker cabinet.
t
Press the Power Button once to
switch your Airmotiv 3B’s On;
press it again to switch your
Airmotiv 3B’s into Standby mode.
Note: The RED Standby LED is lit when
the Airmotiv 3B’s are in Standby mode.
When the Airmotiv 3B’s are On, the
RED LED will NOT be lit; either the BLUE
BT Input LED will be lit - indicating
that the Bluetooth Input is selected,
or the GREEN Line Input LED will be
lit - indicating that the Line Input is
selected.
t
Press the Input Button to toggle between the Bluetooth Input and the
Line Input. When the Bluetooth Input is selected, the Airmotiv 3B’s will play
audio from whatever Bluetooth device they are currently paired with. When
the Line Input is selected, the Airmotiv 3B’s will play audio from the stereo
analog line level audio source which is connected to the Line Input on the
rear panel of the right speaker.
Note: The BLUE Input LED indicates that the Bluetooth Input is selected; the GREEN
Input LED indicates that the Line Input is currently selected.
Note: The Line Input connector on the rear of the right speaker will accept any
standard stereo line level audio signal - such as the analog output from an iPod
and most portable audio players, or the analog audio output from a computer’s
headphone output or USB DAC.
t
Press or press and hold the Volume Up and Volume Down Buttons to raise
and lower the Volume.
Note: If you continue to press Volume Up when the Airmotiv 3B is at full Volume, you
will hear a loud beep each time the button is pressed.
