background image

Page 15

• 

Place your front-center speaker either directly above or directly below the display. If you 

have a large display and the front-center speaker must be placed above head height, better 

results may be achieved if it is mounted upside down (high-frequency transducer towards 

the floor) and slanted slightly downwards toward the listener. Next in order of preference 

would be to place the center speaker on its side in either location. If both of these locations 

are impractical, and especially if the left-front and right-front speakers are located far from 

the display, the front-center speaker can be located directly to one side of the display (this 

location isn’t optimal, but may work reasonably well in some situations).

• 

If your location permits it, the ideal arrangement is to place your left-front and right-front 

speakers on stands away from both the front and side walls. They should be placed such 

that the left-front, center-front, and right-front speakers form an arc equally distant from the 

central listening position.

• 

Side surrounds are typically mounted above head height and approximately even with the 

center of the listening position.

• 

Rear surrounds are located, as you might guess, at the rear of the listening position, and are 

typically mounted on brackets on the rear wall above the listening position.

Listener

Center

Left Side

Surround 

Right Front

Display

Right Side

Surround 

Left Rear

Surround 

Right Rear

Surround 

Sub-woofer

Left Front

Listener

One example of placement for surround-sound 

speakers

Summary of Contents for Airmotiv 4s





































Reviews: