User manual motion sprint 600 med /600
Version 1.1
Page 10 of 21
4.10 Online-Training with RFID
As an option the units can get equipped with a RFID reader (Mifare, Hitag, Legic – Attention: Please take care of
the proper specifications when ordering. Solely with the right reader the compatibility will be given). The
online-version gets controlled with a compatible PC-Software.
To start the training there are different alternatives depending on the RFID-media.
Working with a RFID-card one has to insert the card into the reader for user identification and call of the
current workout. The training can start. Go is shown in the display.
Using a wristband one has to press the RFID-button. Then the wristband hast to get hold over the RFID-button.
The training can start. Go is shown in the display.
Using a media other than a RFID-card has to be announced before production of the units as special settings
will be needed.
Fig. 5: RFID-
button for
RFID
identification, in case the medium cannot be read via the slot
If the message “insert again” is shown several times in a row, press the SCAN-button to display a more specific
error message.
4.11 Results
After the end of each workout or after pressing the
COOL
button, all workout results will be shown on the
display. According to the program selected, the relevant results are shown. When there is no reaction the
workout will be stopped after showing the results. By pushing the COOL button, the workout can be stopped at
any time.
The results are shown in the parameter area as well as in the dot matrix section. Some figures are average
values (wattage, km/h, pulse), some are accumulated values (km, k-cal, time). Average values are marked with
the
Ø
symbol. This enables the control of personal fitness-development and thereby motivates a frequent user.
If the training has been conducted using a storage media, the training results from every type of ergometer are
saved separately onto the storage media. The analysis of the results saved can be done at the ergometer directly
or on a PC if the training manager software is available.
RFID-button
