Emos SWP600, Instruction Manual

Page: 2 / 24

2
UNIVERSAL POWER ADAPTER
Before putting this product into the operation, read carefully this instruction manual.
Directions for Use:
Switchable AC pulse source SWP600 is intended to supply electrical equipment operating
at DC and at the maximum current stated in the table below.
The output voltage of the AC pulse source is stabilized - the voltage value is kept on
the preset level - regardless the volume of the load.
Technical Specification
Input Voltage, Frequency
and Current:
100 - 240 V~; 50/60 Hz; 0,16 A
Output Voltage: 3 V / 4,5 V / 5V / 6 V / 7,5 V / 9 V / 12 V
Output max. Current: 600 mA
The Cord Length: ca. 1,8 m
Power Consumption
without Load:
< 0,3 W
Efficiency at Load: >75%
Dimensions: 69 × 39 × 31 mm
Removable Power
Connectors:
B: 3,5/15 mm; C: 3,0 × 1,0/10 mm; D: 5,0 × 2,1/12 mm; G:
5,5 × 2,5/12 mm; H: 3,5 × 1,35/10 mm; I: 4,0 × 1,7/10 mm; S:
2,35 × 0,75/8 mm
Putting into the Operation:
1. Power - check (in mA) the desired power intended for your appliance and verify, according
to the table, whether the chosen AC source can be used.
2. The output voltage can be changed - set the desired voltage with the turning switcher in
the accordance with the appliance. The turning voltage switcher is situated on the bottom
side of the source, therefore during an operation, it is unlikely to unintentionally change the
voltage.
3. The output connector – choose a compatible connector to your appliance (you can try to
insert it into the charging connector of the appliance).
4. Choose the connector‘s correct polarity according to the label on your appliance. Then insert
it into the socket at the end of the cable of the AC adapter. See the scheme below.
GB
Positive Negative