Emos P5822, Manual

Page: 7 / 84

7
Press „“ or „COST/-“ to select the week you want to show. -1 indicates last
week, -2 two weeks ago etc. up to -7 seven weeks ago. The real power consumption is
shown on the second line.
6.3 Actual power consumption in the last 7 months:
Hold the „HISTORY“ button for 3 seconds once screen shows the „monthly“ value.
Press „“ or „COST/-“ to select the month you want to show. -1 indicates last
month, -2 two months ago etc. up to -7 seven months ago. The real power consumption
is shown on the second line.
7. Quickly deleting data
7.1 Press and hold „“ and „COST/-“ simultaneously for 3 seconds, until the
screen starts blinking.
7.2 Then press and hold „SET/OK“ for 3 seconds. All the data will be erased.
8. Replacing batteries
8.1 Open the battery compartment cover on the back side of the consumption metre.
8.2 Remove the flat batteries.
8.3 Insert new 2× 1.5 V (LR44/AG13) batteries. Make sure you observe the correct polarity.
Use alkaline batteries only, not rechargeable ones.
8.4 Close the cover.
Safety warning
• Connect the metre to a 230 V~/50 Hz (±10 %), max. 16 A network fitted with a safety
switch/contact.
• Only appliances powered by 230 V~/50 Hz voltage can be connected to the metre.
• Pay attention to the data on the type label of the appliances connected to the device.
• The maximum input power of the connected appliances must not exceed 3 680 W
(max. current 16 A).
• Use the metre in closed spaces and dry environments only. Using the metre outdoors
is strictly forbidden!