Emos P5729, Manual

Page: 3 / 48

3
GB | Wireless Doorchime
The set consists of a doorbell button (transmitter) and a chime (receiver). The
chime is deigned for constant connection to 230 V AC/50 Hz mains. The button
is battery-free. Transmission between the button and the chime is done via radio
waves at a frequency of 433.92 MHz. The range depends on local conditions
and reaches up to 180 m in open spaces without interference. The set has a
so-called “self-learning” function – the button is able to generate its own pairing
code which is then received by the chime and stored in its memory. The set
can thus be expanded with additional buttons. Their “self-learning” function
also prevents the set from affecting neighbouring doorbells. For proper usage
of the wireless doorbell, read the instruction manual thoroughly.
Specifications
Transmission range: up to 180 m in an open area (can drop down to one fifth
in a busy area)
Transmission frequency: 433.92 MHz, 10 mW e.r.p. max.
Button: water resistant; enclosure rating IP44
Pairing of chime with buttons: self-learning function
Pairing capacity: maximum of 6 buttons (replacement button P5729T)
Number of ringtones: 36
Chime power supply: 230 V AC/50 Hz
Button power supply: battery-free
Includes: double-sided adhesive tape
Chime Description (see Fig. 1)
1 – bell LED
2 – speaker
3 – pairing/volume setting button
4 – ringtone change button
Button Description
(see Fig. 2)
1 – button LED
2 – ring button
3 – holes for opening the battery
cover (rear)
4 – openings for mounting onto
a wall
Pairing the Button with the Chime
1. Plug the chime unit into a 230 V AC/50 Hz socket.
2. Then, long-press the pairing button on the chime for ca. 5 seconds.
3. The chime LED will light up; release the button.
The chime will switch to self-learning pairing mode which lasts for
25 seconds.
During this time, press the ring button. The chime will ring and the button
is now paired with the chime.
This automatically ends self-learning mode.
4. To pair multiple buttons, repeat the process for each button from step 1.