3
• max. high-frequency output of the transmission unit: 0.181 mW e.r.p.
• power supply: 1× CR2032 3 V (included)
Basic Information
• Do not plug the sockets into one another.
• The distance between two sockets during use should be over 50 cm.
• Do not plug the wireless socket into an extension cable. Plug only directly
into a main, wall-mounted power source.
• Do not plug in devices that should always be supervised (e.g. an iron or an
electric skillet) – risk of fire or other damage.
• Do not open the device. Repairs must only be done by a professional.
Improper use or inexpert repair can cause a short circuit or injury by
electric current.
• Signal range is always listed as a maximum in an open area without obsta-
cles; it can be significantly affected by the material of the building where
the device is being used. Signal range also depends on the placement of
the transmitter and the receiver. Avoid placing parts of the device in the
vicinity of heat sources, sources of electromagnetic fields, high-voltage
cables and large metal objects.
Information for Use
• You can use the wireless set of sockets immediately after unpacking. The
receiver can be plugged into any wall socket. The device which is to be wi-
relessly controlled must be plugged into the wireless socket. The wirelessly
controlled appliance must always be on.
Remote Controller – Transmitter
• Open the battery compartment cover and remove the protective film.
Close the cover.
• A socket can be assigned to any of the A, B, C, D button pairs.
Summary of Contents for P0067
Page 24: ...24...
