Emos M0230, Manual

Page: 12 / 148

12
Connect the measuring tips to the battery so that the red tip is con-
nected to the positive pole and the black to the negative pole of the
battery. The measured value will appear on the screen.
Note: When measuring is finished, disconnect the measuring tips
from the tested battery.
Temperature Measurement
1. Switch to the function and repeatedly press the Select
button to choose between measuring in °C or °F.
2. Connect the black plug (minus) to the COM socket and the red
plug (plus) of the type K thermocouple to the INPUT socket.
3. Carefully touch the end of the thermocouple onto the measured
object. The object must not be live; be mindful of any rotating
parts on various devices. The screen will show the measured
temperature after a few moments.
Note:
The type K thermocouple included with the multimeter is designed
for measuring temperatures between -40 °C and 300 °C. Measuring
temperatures above 300 °C may cause damage to the thermocouple
and the multimeter! If you want to measure higher temperatures,
use a different thermocouple with a higher measurement range!
This device is not intended for use by persons (including children)
whose physical, sensory or mental disability or lack of experience or
knowledge prevents them from using it safely. Such persons should
be instructed in how to use the device and should be supervised
by a person responsible for their safety. Children must always be
supervised to ensure they do not play with the device.
Do not dispose with domestic waste. Use special collection
points for sorted waste. Contact local authorities for informa-
tion about collection points. If the electronic devices would
be disposed on landfill, dangerous substances may reach
groundwater and subsequently food chain, where it could affect
human health.
You can request technical assistance from the supplier:
EMOS spol. s r. o., Lipnická 2844, 750 02, Přerov