Emos J6012, Manual, Page: 6 / 104

6
GB | Digital Terrestrial Receiver
Safety Instructions and Warnings
Read the user manual before using the device.
Follow the safety instructions in the manual.
The product is designed to serve reliably for many years if used properly.
• Read the manual carefully before using this product.
• Do not subject the product to excessive force, impacts, dust, high temperatures or humidity - these may cause
malfunction, shorter battery life, damage to batteries and deformation of plastic parts.
• Do not expose the product to rain or moisture if it is not designed for outdoor use.
• Do not cover up or insert any objects in the product's vents.
• If the power cable or plug is damaged or if the connection of the plug to the socket is loose, do not use the
product. Doing so may cause injury by electric current or cause fire due to a short circuit.
• Do not exceed the input voltage or use voltage other than specified for the product. Make sure the voltage
listed for the product is identical with the voltage in your area.
• Do not disassemble, repair or modify the product. Have it repaired by the retailer you bought it from.
• Do not tamper with the internal electric circuits of the product – doing so may damage the product and will
automatically void the warranty.
• Do not leave appliances connected to the mains without supervision.
• Keep the product and its power cord out of reach of children. This product may be used by persons with im-
paired physical, sensory or mental capabilities or persons without experience and knowledge only if they are
supervised or instructed in the safe use of the product and understand the risks that may occur.
Do not dispose of electrical appliances as unsorted municipal waste; use sorted waste collection points.
Contact local authorities for up-to-date information about collection points. If electrical appliances are de-
posited in waste landfills, hazardous substances may leak into the groundwater, enter the food chain and
harm your health.
EMOS spol. s r.o. hereby declares that radio device type J6012, J6014 is in accordance with directive 2014/53/EU.
The full wording of the EU declaration of conformity is available at http://www.emos.eu/download.
Package Contents
EM190
Universal remote
User manual
2× AAA batteries
External IR sensor (only for model EM190-S, Fig. 1 b)
Device Description
Control Elements and Connectors
Front Panel (Fig.1)
Power – ON / OFF button
CH+/- – Channel switching button
Screen – information about current channel / clock
External IR sensor connector (only for model EM190-S, Fig. 1 b)
Rear Panel (Fig. 2)
ANT IN – signal input
COAXIAL – digital audio output (Only for model EM190)
USB – port for connecting a data storage device
HD-OUT – HDMI video output
SCART – analogue video/audio output
12 V power supply input (only for model EM190-S)
Universal Remote (Fig. 3)
The EM190 remote has 4 programmable buttons for TV control: TV Power, Vol +, Vol-, TV/AV. After programming
these functions over from the original remote for the TV, you can control basic functions directly using the EM190
remote. The learned codes will remain in the memory even after battery removal.
Button Programming
Long-pressing the SET button for 5 seconds switches the remote to learning mode (LED stops flashing and will
remain lit).
While the LED is lit up, place the original remote and the EM190 remote opposite each other at a distance of 3–5 cm.
Short-press and release the button you wish to programme on the EM190 remote.
Press and hold a button on the original remote; once the LED on the EM190 remote flashes twice and then again
stays lit up, release the button.
Continue using the same method with the other buttons. After learning is finished, press the Set button once
more; the LED swill turn off.
Description of Buttons on the Remote
1 –
STANDBY:
switch receiver on/off
2 – Next
3 –
Fast forward
4 – Rewind