Emos H1133, User Manual

Page: 4 / 148

4 5
4
|
Interface
39 mm
Photoresistor
Reset
Arming
Arming LED
Tamper alarm
RJ45 Network Cable
Microphone
Camera
PIR sensor
Working light
“Call” button
Speaker
Infrared led
145 mm
39 mm
93 mm
Doorbell is in disarming state if arming led is on after power on, it will enter arming state and arming led is off after press the
arming button. it will sound an alarm after press arming button under arming state.
5 | Network connections and power supply
Doorbell’s power and network connection selection, please refer to:
1. Power and network cable both available, plug the network cable and power.
2. Power available but no network cable, plug the power and connect to WiFi, try to ensure that the doorbell’s received signal
strength is higher.
a) Power with adapter
9~ 16 V 1 A
WiFi Doorbell
GB