10
TO MANUALLY SET THE CLOCK / TIME ZONE SELECTION
1. Press and hold
[ CLOCK ]
key
for 2 seconds until
12 or 24 Hr
flashes
2. Use
[
]
key /
[
]
key to adjust, and press
[ CLOCK ]
key
to proceed to the next setting.
3. Press
[ CLOCK ]
key
again to step the setting items in this sequence: Hour format
Hour
Minute
Second
Year
Month
Date
Hour offset
Language
DST AUTO/OFF.
Note:
- The unit will automatically exit setting mode if no key was pressed in 60 seconds.
- The hour offset is for DCF and MSF version. Its range is between -23 and +23 hours
-
DST
(Daylight Saving Time) feature is set to Auto (factory set).
- The clock has been programmed to automatically switch when the daylight saving time is in effect. User ca
set the
DST
to
OFF
to disable the feature.
DISABLE / ENABLE RCC SIGNAL RECEPTION
1. Press and hold the
[ RCC ]
key 8 seconds to disable the reception.
2. Press and hold the
[ RCC ]
key 8 seconds to enable automatic RCC reception.
RCC on
RCC off
TO TURN ON / OFF ALARM CLOCK (WITH ICE-ALERT FUNCTION)
1. Press the
[ ALARM ]
key anytime to show the alarm time.
2. Press the
[ ALARM ]
key to activate the alarm.
3. Press again to activate alarm with ice-alert function.
4. To disable the alarm, press until the alarm icon disappears.
Alarm off
Alarm on
Alarm with ice-alert
TO SET THE ALARM TIME
1. Press and hold the
[ ALARM ]
key for 2 seconds to enter alarm setting mode
HOUR
will begin to flash
2. Use
[
]
key /
[
]
key to adjust
HOUR
, and press the
[ ALARM ]
key to proceed to set
MINUTE
.
3. Repeat 2 above to set
MINUTE
, and then press the
[ ALARM ]
key to exit.
STOP ALARM ALERT & SNOOZE
1. Press
[ SNOOZE / LIGHT ]
key to stop the current alarm and enter snooze. Alarm icon will be flashin
continuously. The alarm will sound again in 5 minutes. Snooze can be operated continuously in 24 hours.
2. When the alarm is sounding, it will stop automatically without pressing any key in 2 minutes. Also you can
press and hold the
[ SNOOZE / LIGHT ]
key for 2 seconds or press
[ ALARM ]
key to stop the current
alarm. And the alarm will automatically sound again at the alarm time next day.
Note:
- Pressing the
[ ALARM ]
key twice when alarm time is being displayed will activate the temperature-adjusted
pre-alarm.
- The alarm will sound 30 minutes earlier if it detects outside temperature is below -3°C.
Summary of Contents for ESW5003
Page 110: ......