Emos EO117, Manual

Page: 3 / 48

Upper Side – Buttons
Press Hold
MODE
Shows current time, alarm clock,
temperature limit
SET Temperature unit °C/°F Time/alarm/temperature limit setting
UP Max/min values, 1 step ahead Max/min values
DOWN 1 step back Temperature limit activation
SNZ Snooze activation (postpone the alarm)
Getting Started
1. Insert batteries (2× LR1130) into weather station. Respect correct polarity to avoid damaging the
weather station.
2. Use only alkaline batteries of the same type. Do not use rechargeable batteries.
3. To measure the external temperature, put the wire sensor through a window which is not frequently
used in order to avoid damaging sensors. It is necessary to fix the external part of the sensor in
order to avoid damage by wind.
4. If the screen is difficult to read or the transmission from the sensor is unstable, replace the batteries.
Manual Time Setting
1. Hold the SET button in clock display mode.
2. Use UP and DOWN buttons (holding will speed it up) to set time format–hour–minute–year–
month–day–time (summer time).
3. You can move from one value to another by pressing SET button.
Alarm Setting
1. Press MODE to show alarm.
2. Hold SET.
3. Use UP and DOWN to set the required time, melody (7 choices), snooze time limit, number of
snooze function repetition.
4. You can move from one value to another by pressing SET button.
5. Press MODE to set and then UP to activate the alarm (
will be displayed) and snooze function
(Zz will be displayed).
6. Press UP again to deactivate the alarm and snooze function. Icons will disappear.
Snooze Function
You can postpone the alarm by set time by pressing SNOOZE button placed on the upper side of the
station. Press it when the alarm goes off. ZZ icon will flash.
In order to have as many snooze repetitions as preset, do not press any other button.
The first sound is not counted in the preset repetition. The alarm clock will be activated the next day again.
Internal and External Temperature, Humidity and Temperature Unit
Internal temperature is displayed in G field, humidity in E field.
External temperature is displayed in I field. Use SET button to choose the temperature unit °C/°F.
Maximal and Minimal Temperature and Humidity Values
Maximal and minimal values of internal temperature and humidity and external temperature are
automatically recorded into memory.
Press UP button once to display maximal recorded values (MAX).
Press UP button again to show minimal recorded values (MIN)
Hold UP button to delete the memory.