4
Setting an alarm
1. Press repeatedly the AL-SET button. Value of time is flashing with the icons ALM-1 or ALM-2.
2. Use the B4/B5 buttons to set the desired alarm time.
3. Use the B6/B7 buttons to activate alarm No.1/No.2, or both
.
If the
icon is displayed, the alarm is active.
Snooze and display backlight (SNOOZE/LIGHT)
• Use the SNOOZE/LIGHT button while the alarm is ringing to move ringing 4 minutes forward,
the alarm icon will be flashing. In this way, it is possible to delay ringing up to 8 times.
• Press any key, except SNOOZE/LIGHT, to turn off the SNOOZE function. The alarm will sound
the next day. If you do not press the SNOOZE/LIGHT button while ringing, the alarm will be
active for 2 minutes.
• Press SNOOZE/LIGHT to activate the display backlight. Backlight time is 5 seconds.
Problem solving
If the clock does not show the correct time or if there is no DCF reception icon, reset the clock
by pressing the RESET button.
Incorrect time or loss of synchronization can occur due to external electromagnetic interference.
Care and maintenance
The product is designed to provide trouble-free service for many years if operated appropriately.
Here is some advice for proper operation:
• Read carefully the manual before using this product.
• Do not expose the product to direct sunlight, extreme cold and moisture, and sudden
changes in temperature (this may compromise detection accuracy).
• Do not place the product in locations prone to vibration and shocks – these may cause
damage.
• Do not expose the product to excessive force, impacts, dust, high temperatures, rain or
humidity - these may cause malfunction, shorter battery life, damage to batteries and
deformation of plastic parts.
• Do not place any open flame sources on the product, e.g. a lit candle, etc.
• Do not place the product to places with inadequate air flow.
• Do not insert any objects in the product vents.
• To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning
agents - they could scratch the plastic parts and cause corrosion of the electric circuits.
• The product may not be exposed to dripping or splashing water. Do not immerse it in water
or other liquids.
• In the event of damage or defect of the product, do not perform any repairs by yourself.
Have it repaired in the shop where you bought it.
• Remove dead batteries – they could leak and damage the product. Use only new batteries
of the recommended type and make sure polarity is correct when replacing them.
• This device is not intended for use by persons (including children) whose physical, sensory
or mental disability or lack of experience and expertise prevents safe use, unless they are
supervised or instructed regarding use of the appliance by a person responsible for their
safety. It is necessary to supervise children to ensure they do not play with the appliance.
Do not dispose of electrical appliances or the batteries as unsorted municipal waste,
use sorted waste collection points. Contact local authorities for updated information
about the collection points. If electrical appliances are deposited in waste landfills, ha-
