4
Press the – and + buttons simultaneously to repeat search for the DCF77 signal.
Press the – and + buttons simultaneously again to stop search for the DCF77 signal.
DCF signal will be synchronised daily between 2:00 and 3:00 am.
In normal conditions (at a safe distance from sources of interference, such as television sets or computer monitors) the detection
of time signal takes several minutes. If the weather station does not detect the signal, follow these steps:
1. Move the weather station to another location and try to detect the DCF signal again.
2. Check the distance of the clock from the sources of interference (computer monitors or television sets). It should be at
least 1.5 to 2 m during the reception of the signal.
3. When receiving DCF signal, do not put the weather station to the proximity of metal doors, window frames and other metal
structures or objects (washing machines, dryers, refrigerators etc.).
4. In reinforced concrete structures (cellars, high-rise buildings etc.), the DCF signal reception is weaker, depending on the
conditions. In extreme cases, place the weather station close to a window toward the transmitter.
Reception of the DCF 77 radio signal is affected by the following factors:
• thick walls and insulation, basements and cellars
• inadequate local geographical conditions (these are difficult to assess in advance)
• atmospheric disturbances, thunderstorms, electrical appliances with no interference elimination, television sets and com-
puters located near the DCF receiver.
Manual setting of time and date
1. Press and hold the MODE button.
2. Use the + and – buttons to set: year - month - day - time zone - day language - 12/24 time format - hour - minute - code
3. Week No. is automatically set based on the set day.
4. Press MODE to move between the items.
Calendar languages are as follows:
GE – German, EN – English, IT – Italian, FR – French, DU – Dutch, SP – Spanish, DA – Danish.
If during the process of setting no button is pressed for 20 seconds, the main display of time will return.
Indoor and outdoor temperature, humidity, unit of temperature
Indoor temperature and humidity are displayed to the right of the IN icon.
Outdoor temperature and humidity are displayed to the right of the OUT icon.
Use the button to select the °C/°F unit of temperature.
Cyclic display of values from attached sensors
If you have connected more sensors, press the CHANNEL button repeatedly - the
icon will be displayed under the sensor No.
The weather station will display the values from all connected sensors in a loop (5 second interval).
Press the CHANNEL button repeatedly to cancel the cycle; the
icon will not be displayed.
Display of maximum and minimum readings of temperature and humidity
Press the + button repeatedly to gradually display the maximum and minimum readings of temperature and humidity. Hold
the + button to delete readings from the memory.
Temperature, humidity and pressure trends
The arrow shows the trends of values of the temperature (icon 30, 23) and moisture (icon 7, 10) measurements on a specific
sensor or station.
The weather station also displays the pressure trend (icon 2).
Indication on the display
Temperature and humidity
trends
Rising
Constant
Falling
Indication on the display
Pressure trend
Rising
Constant
Falling
Atmospheric pressure - history and chart
Atmospheric pressure in hPa/inHg units and pressure history chart for the last 12 hours is displayed in fields 3, 4 and 5.
Moving the weather station to another place will affect the measured values.
Measurement will stabilise within 12 hours of battery insertion or weather station moving.
Press the HISTORY button repeatedly to display gradually the pressure values for the last 12 hours.
The measured value and time zone are displayed in fields 3 and 4.
Manual setting of the altitude, weather icon and pressure unit
After inserting batteries into the weather station, or by pressing and holding the HISTORY button, set your altitude for more
precise pressure calculation.
Use the + and – buttons to set a value in the range -200 m to 2000 m (10 m increment).
After setting the altitude, press HISTORY and use the + and – buttons to set the weather forecast icon.
After setting the forecast icon press HISTORY and use the + and – buttons to set the hPa/inHg pressure unit.
